Analisis Faktor-Faktor Penyebab Kontaminasi pada Stock Rom di PT Tri Oetama Pesada

Authors

  • Michael Kentaro Lendrawan Universitas Palangka Raya
  • Deddy Nan Setya Putra Tanggara Universitas Palangka Raya
  • Yos David Inso Universitas Palangka Raya
  • Yossa Yonathan Hutajulu Universitas Palangka Raya
  • Ferra Murati Universitas Palangka Raya

DOI:

https://doi.org/10.58192/ocean.v5i2.5295

Keywords:

Coal, Contamination, FIFO, Stock ROM, Stockpile Management

Abstract

This study aims to analyze coal stockpiling management in the Stock ROM area to minimize contaminants at PT Tri Oetama Persada, Batapah Village, Timpah District, Kapuas Regency, Central Kalimantan. Coal contamination is a significant issue caused by suboptimal mining, hauling, and stockpiling processes, which may reduce coal quality. This research uses a descriptive quantitative method through field observations, documentation, and analysis of primary and secondary company data. The analysis focuses on stockpiling patterns, management systems, contamination factors, and field implementation. The results indicate that the Stock ROM applies the Chevcon stockpiling pattern with a FIFO (First In First Out) system. However, several problems were identified, including ineffective FIFO implementation, excessive coal pile height, and limited supervision during stacking and reclaiming activities. Contamination factors include poor ROM base conditions, water accumulation, foreign material contamination, and inadequate cleaning and recovery processes. Minimizing efforts include improving FIFO supervision, optimizing Stock ROM design and maintenance, separating materials during stockpiling, and conducting routine temperature and cleanliness monitoring. Improved management practices are expected to maintain coal quality and reduce contamination risks.

References

Ambeng, R. R., & Putrawiyanta, I. P. (2025). Pengamatan kegiatan coal getting PIT 2 di PT Dayak Membangun Pratama Kecamatan Kurun Kabupaten Gunung Mas Provinsi Kalimantan Tengah. Jurnal Teknik Pertambangan.

Ariansyah, A. (2023). Kajian teknis produktivitas alat gali muat dan alat angkut untuk mencapai target produksi batubara pada PT Surya Anugrah Sejahtera Desa Rantau Pandan, Kabupaten Muara Bungo, Provinsi Jambi (Skripsi). Universitas Jambi.

Arif, I. (2014). Batubara Indonesia. PT Gramedia Pustaka Utama.

ASTM International. (2014). Standard Test Methods for Bulk and Dry Density of Peat and Peat Products (ASTM D4531-15). ASTM International.

ASTM International. (2016). Standard test method for grindability of coal by the Hardgrove-machine method (ASTM D409/D409M-16). ASTM International.

Boggs, S. (2016). Principles of sedimentology and stratigraphy (4th ed.). Cambridge University Press.

Budhu, M. (2011). Soil mechanics and foundations (3rd ed.). John Wiley & Sons.

Caterpillar Inc. (2013). Caterpillar hauling handbook. Caterpillar Global Mining.

Caterpillar. (2022). Performance handbook (Ed. 42). Caterpillar Inc.

Darmawan, A., & Basuki, R. (2015). Teknologi penambangan batubara. Yogyakarta: Penerbit Deepublish.

Das, B. M. (2010). Principles of geotechnical engineering (7th ed.). Cengage Learning.

Dzakir, L. O., Dullah, N. M., Prianata, L. O., Yudha, W., Kurnia, L. M. H., Kadar, M. I., Shaddad, A. R., Amir, M. K., Ambarasari, I. S., & Aldiyansyah. (2023). Teknis penambangan nikel (S. G. Rustam & M. S. P. A. Rustam, Eds.). CV. Tohar Media.

Dzakir, L. O., Shaddad, A. R., Syahrul, H., Kurnia, H., Aldiyansyah, A., Prianata, Y. L. O., Amir, M. K., Bakri, S., Kadar, M. I., & Mahmudah Dullah, N. (2024). Rekayasa perencanaan tambang (B. A. Ampangaloo & S. Antarissubhi, Eds.; A. S. Khairunisa, Desain sampul dan tata letak). CV. Tohar Media.

Fahmi, M., & Ghuzdewan, T. A. (2023). Productivity analysis PC-300 and PC-400 in earthworks at a gold mining project in Indonesia. Graduate of Civil and Environmental Engineering, Universitas Gadjah Mada. https://doi.org/10.22146/jcef.6600

Friedman, G. M. (1979). Principles of sedimentology. Springer-Verlag.

Hall, R. W. (2003). Introduction to construction equipment management. Prentice Hall.

Hartman, H. L., & Mutmansky, J. M. (2002). Introductory mining engineering (2nd ed.). Wiley.

Herjanto, E. (2007). Manajemen produksi dan operasi. Jakarta: Grasindo.

Hustrulid, W. A., & Kuchta, M. (2006). Open pit mine planning and design (2nd ed.). Taylor & Francis.

Jaya, R. (2013). Alat berat dan penggunaannya. Yogyakarta: Graha Ilmu.

Komatsu Ltd. (2009). Specification and Application Handbook (30th ed.). Japan: Komatsu Ltd.

Komatsu. (2015). Product specification and operation manual: PC300 series excavator. Komatsu Ltd.

Kujundžić, T. (2012). Surface mining equipment productivity factors. Mining Engineering Journal, 64(5), 23–29.

McKinnon, R. C. (2010). Cause, Effect, and Control of Accidental Loss. CRC Press.

Mokoagow, F. Y., & Anondho, B. (2023). Faktor-faktor yang mempengaruhi produktivitas excavators pada pekerjaan galian di Solo dan Manado. JMTS: Jurnal Mitra Teknik Sipil, 6(1).

Nurhakim, A. (2016). Manajemen produksi pertambangan. Bandung: Alfabeta.

Odorikus, O. G. M. (2024). Analisis match factor alat gali muat dan angkut pada kegiatan ore getting di blok I di PT Billy Indonesia Site Parenggean Kabupaten Kotawaringin Timur Provinsi Kalimantan Tengah (Skripsi). Universitas Palangka Raya.

Pemerintah Republik Indonesia. (2020). Undang-Undang Republik Indonesia Nomor 3 Tahun 2020 tentang Perubahan atas Undang-Undang Nomor 4 Tahun 2009 tentang Pertambangan Mineral dan Batubara. Presiden Republik Indonesia. https://doi.org/10.31850/malrev.v4i2.628

Peurifoy, R. L., Schexnayder, C. J., Shapira, A., & Schmitt, R. (2011). Construction planning, equipment, and methods (8th ed.). McGraw-Hill.

Prodjosumarto, P. (1993). Teknologi mekanisasi tambang. Institut Teknologi Bandung.

PT Asmin Bara Bronang. (n.d.). Coal concession. Turangga Resources. Diakses 18 Mei 2025, dari https://www.turanggaresources.com/id/coal-concession/pt-asmin-bara-bronang.

Putrawiyanta, I. P., Nadeak, R., & Nababan, I. (2024). Produktivitas alat gali muat dan angkut pada kegiatan overburden removal dan coal getting. Jurnal Teknika, 8(1), 15–20. https://doi.org/10.36873/jt.v8i1.10955

Simamora, A., Putrawiyanta, I. P., Iashania, Y., Wiryanto, Y. H., & Fridtriyanda, A. (2025). Analisis produktivitas excavator Komatsu PC 300 pada kegiatan coal getting di PT Lautan Hutan Lestari Kecamatan Teweh Tengah Kabupaten Barito Utara Provinsi Kalimantan Tengah. Jurnal Teknik Pertambangan.

Soetrisno, S., Supriatna, S., Rustandi, E., Sanyoto, P., & Hasan, K. (1994). Peta geologi lembar Buntok, Kalimantan skala 1:250.000 [Peta]. Pusat Penelitian dan Pengembangan Geologi. https://www.tutorialkitacerdas.my.id/2020/09/download-peta-geologi-regional-lembar-kalimantan.html.

Speight, J. G. (2013). The Chemistry and Technology of Coal (3rd ed.). CRC Press. https://doi.org/10.1201/b12497.

Supriatna, S., Sudradjat, A., & Abidin, H. Z. (1995). Peta geologi lembar Muaratewe, Kalimantan skala 1:250.000 [Peta]. Pusat Penelitian dan Pengembangan Geologi. https://www.tutorialkitacerdas.my.id/2020/09/download-peta-geologi-regional-lembar-kalimantan.html.

Thomas, L. (2002). Coal geology. Wiley. https://doi.org/10.1002/9781118385729.

Ward, C. R. (2016). Analysis, sampling and testing of coal. CSIRO Publishing.

Downloads

Published

2026-06-30

How to Cite

Michael Kentaro Lendrawan, Deddy Nan Setya Putra Tanggara, Yos David Inso, Yossa Yonathan Hutajulu, & Ferra Murati. (2026). Analisis Faktor-Faktor Penyebab Kontaminasi pada Stock Rom di PT Tri Oetama Pesada. Ocean Engineering : Jurnal Ilmu Teknik Dan Teknologi Maritim, 5(2), 278–289. https://doi.org/10.58192/ocean.v5i2.5295