Penilaian Risiko K3 Pekerjaan Enclosed Space Entry Pada Kapal Km. Sabuk Nusantara 40 Menggunakan Metode Job Safety Analysis Dan Bow Tie Risk Assesment
DOI:
https://doi.org/10.58192/ocean.v2i1.1166Keywords:
Entering a closed space, Bowtie, The risk of working in an enclosed spaceAbstract
Work accidents that occur on ships often occur in various cases, one of which is a work accident that occurs in an enclosed space. This is often experienced by a crew member who is unable to understand the proper methods and procedures for working in an enclosed space. Against this background, the researcher conducted a risk assessment of personal safety when working in an enclosed space to find out the causes, impacts and controls of the crew members' lack of understanding and knowledge of personal safety when working in an enclosed space. In this descriptive study using the Job Safety Analysis (JSA) method and the Bowtie method, the researchers obtained very high/extreme (E) scores in carrying out work in closed spaces, namely the ship's crew inhaled poisoned air/gas while checking in the cofferdam tank where these results obtained an likelihood value of 66% and a severity value of 71%. By holding routine drills regarding the application of safety principles in an enclosed space in more detail to all Ship's Crew and at the end of the drill closing displays a training video that displays shows about various accidents that occurred in an enclosed space and the causes of these events are reviewed in detail. So with a more detailed drill on the application of safety principles regarding enclosed space material to all Ship's Crew, it is hoped that it can minimize the occurrence of work accidents in an enclosed space.
References
Basuki, M., 2022, Analisa Risiko Pembangunan Barge Mounted Power Plant (BMPP) 60 MW di PT. PAL Indonesia (Persero) Menggunakan Metode Failure Mode and Effect Analysis (FMEA) dan Matrik Risiko, Jurnal Sumberdaya Bumi Berkelanjutan (SEMITAN), Vol 1, No 1, Hal 476-492.
Beltsazar, A., 2021, Optimalisasi Penanganan Prosedur Memasuki Enclose Space Guna Mengurangi Kecelakaan Kerja Di MT. RAINA. Diploma thesis, Politeknik Ilmu Pelayaran Semarang.
Darmawan, I., dan Basuki, M., 2022, Analisis Risiko Keselamatam dan Kesehatan Kerja (K3) pada Aktivitas Bongkar Muat di Dermaga Pelayaran Rakyat Gresik. Prosiding SENASTITAN: Seminar Nasional Teknologi Industri Berkelanjutan, Vol 2, Hal 70-77.
Davis, D., and Cosenza, R., M., 1988, Business Research For Decision Making, Pws-Kent Publishing Company
Depnakertrans R.I. 2008. Petunjuk Teknis Penyelenggaraan Pelayanan Kesehatan Kerja. Jakarta.
Endraswara, D., Basuki, M., dan Kusuma, A. I., 2017, Penilaian Risiko Proses Bongkar Curah Kering Menggunakan Metode Fmea (Failure Mode And Effect Analysis) Di PT. XYZ, SNTEKPAN V, ITATS, Hal D15-D20.
Firmansyah, M. I dan Basuki, M., 2021, Risk Assessment K3 Pada Pekerjaan Bongkar Muat Di Dermaga Jamrud Surabaya Menggunakan Metode HIRAC Dan FMEA, Jurnal Sumberdaya Bumi Berkelanjutan (SEMITAN), Vol 3, No. 2, Hal 372-382.
Gulen, M.F., Tekeli, M. M., Inal, O. B., Arslan, O., and Kadioglu, M., 2022, A Bow-Tie Analysis for the Navigational Safety and Environmental Sustainability on the 1915 Çanakkale Bridge, Proceedings of ISEMAS 2022.
Hidayat, T., 2019, Upaya Meningkatkan Keselamatan Kerja Pada Saat Memasuki Enclosed Space di MT. Arenza XXVII. Diploma thesis, Politeknik Ilmu Pelayaran Semarang.
Labor, S. U. (2020). https://www.bls.gov/cew/publications/employment-and-wages-annual-averages/2020/home.htm#:~:text=In%202020%2C%20BLS%20derived%20totals%20of%2010.5%20million,every%20employer%20covered%20by%20UI%20or%20by%20UCFE.%20Quarterly%20Census%20of%20Employment%20and%20Wages,%201 Diakses terakhir 25 November 2022
Nasrululah, P.N., Basuki, M., dan Pramudya, I.S., 2021, Penilaian Risiko K3 Pada Penyeberangan Ketapang-Gili Manuk Menggunakan Bow-Tie Risk Assesment, Jurnal Sumberdaya Bumi Berkelanjutan (SEMITAN), Vol 3, No 1, Hal 237-243.
OHSAS 18001:2007. Occupational Health and Safety Assessment Series. OH&S Safety Management Systems Requirements.
Ramadan, R., M., dan Basuki, M., 2023, Penilaian Risiko Operasional Keselamatan Dan Kesehatan Kerja Pada PT. Dewa Ruci Agung Menggunakan Metode FMEA dan Matrik Risiko, Prosiding SENASTITAN: Seminar Nasional Teknologi Industri Berkelanjutan, Vol 3.
Ramli, S. 2010. Sistem Manajemen Keselamatan & Kesehatan Kerja OHSAS 18001. Jakarta: Dian Rakyat.
Risal, O. 2012, https://oktarisal.blogspot.com/2012/06/enclosed-space-ruang-terbatas.html. ENCLOSED SPACE, -.
Saputro, M. B., dan Basuki, M., 2022, Risk Assessment K3 Pada Divisi Kapal Niaga Pt. Pal Indonesia Menggunakan Metode FMEA (Failure Mode and Effect Analysis), Jurnal Sumberdaya Bumi Berkelanjutan (SEMITAN), Vol 1, No 1, Hal 203-213.
Sholihah, I. R., Basuki, M., dan Santosa, P.I., 2020, Penilaian Risiko Pekerjaan Bunker Untuk Mencegah Tumpahan Minyak Di Atas Kapal Sesuai ISGOTT Pada KM. Camara Nusantara I, Jurnal Sumberdaya Bumi Berkelanjutan (SEMITAN), Vol 2, No 1, Hal 11-18
Syabana, A. M. dan Basuki, M., 2022, Analisis Risiko Keselamatan dan Kesehatan Kerja (K3) Menggunakan Metode Hazard Identification, Risk Assessment and Risk Control (HIRARC) di PT. Bintang Timur Samudera, Jurnal Sumberdaya Bumi Berkelanjutan (SEMITAN), Vo 1, No 1, Hal 110-114
UU RI No.17 tentang Pelayaran, 2018.
Yantono, D. dan Basuki, M., 2021, Penilaian Risiko K3 Pada Terminal Nilam-Mirah Surabaya Menggunakan Matrik Risiko Dan FMEA, Jurnal Sumberdaya Bumi Berkelanjutan (SEMITAN), Vol 3, No. 1, Hal 361-365.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2023 Ocean Engineering : Jurnal Ilmu Teknik dan Teknologi Maritim
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
