Penilaian Risiko Keselamatan Dan Kesehatan Kerja (K3) Pekerjaan Reparasi Kapal Pada PT Dewa Ruci Agung Dengan Menggunakan Metode Hazard Identification And Risk Assesment And Determining Control (HIRADC)
DOI:
https://doi.org/10.58192/ocean.v2i2.1132Keywords:
Work accident, HIRADC, Risk identification, Risk ControlAbstract
This study aims to identify, analyze and mitigate the risks of work accidents at PT Dewa Ruci Agung. Occupational Health and Safety (K3) is very important to be implemented by every company. Prevention of work accidents can be done by knowing the existing risks, one of which is through the Hazard Identification, Risk Assessment and Determining Control (HIRADC) method. The data collection method used in this study uses primary and secondary data. From the results of the study it was found that there were 15 potential hazard risks including the Lifting Process of moving blocks/goods using a crane, the Cutting Process lifting material and placing it on the cutting machine, preparing the cutting machine, the Grinding Process lifting material and placing it in the grinding area, preparing grinding tools, Fitting Process and Working at Height plate installation process, Main Engine (ME) Overhaul Process, New metal seat removal process (ME) using manual tools, Removal process (ME) with Chain block, Cylinder liner (ME) removal process with chain block, Process Welding, Sandblasting and Painting Process, Zinc Anode Process, B3 Waste Disposal Process. Based on the results of the risk analysis, risk identification is then carried out using the HIRADC method which is most likely to reduce the level of risk severity. The risk identification proposed by the researcher is that it is recommended that every worker carrying out the task wear PPE in accordance with the provisions given by the company and the person in charge of the company's K3. So that unwanted events do not occur. Always check tools and Personal Protective Equipment (PPE) regarding their eligibility for worker safety.
References
Alwi., A.F., Basuki, M., & Fariya, S., 2017, Penilaian Risiko K3L Pada Pekerjaan Reparasi Kapal di PT. Dok Perkapalan Surabaya (PERSERO) Menggunakana Hazzard Identification, Risk Assessment, And Determining Control (HIRADC). Seminakel XII, Universitas Hang Tuah Surabaya.
AS/NZS., 4360:2004, Australian/New Zealand Standard Risk Management.
Dainur., 1993, Materi-Materi Pokok Ilmu Kesehatan Masyarakat. Jakarta: Widya Medika.
Desy., 2019, Identifikasi Bahaya Dengan Metode Hazard Identification, Risk Assesment And Risk Control (HIRARC) Dalam Upaya Memperkecil Risiko Kecelakaan Kerja, Di PT. PAL, Vol. 08 No. 01, Hal 34-40.
Faizah., 2021, Analisis Risiko K3 Pada Kegiatan Reparasi Kapal Dengan Menggunakan Metode Hazard Identification, Risk Assessment And Determining Control (HIRADC), di PT. NF.
Hadiningrum., 2003, Keselamatan dan Kesehatan Kerja. Bandung: Politeknik Negeri Bandung.
Internasional Labour Organization., 1984, Pencegahan Kecelakaan. PT Gramedia : Jakarta.
Indonesia., 1960, Undang-undang No. 9 Tentang Pokok-pokok Kesehatan.
John, Ridley., 2003, Kesehatan dan Keselamatan Kerja, Edisi ketiga, Erlangga Jakarta.
Kurniawan, A., 2017, Identifikasi Bahaya Pada Pekerjaan Maintenance Kapal Menggunakan Metode HIRARC dan FTA di Industri Kapal. In Seminar k3 1 (1), 182-186.
Moekijat., 2004, Manajemen Lingkungan Kerja. Bandung: Mandar Maju.
Mathis., Jackson., 2006, Manajemen Sumber Daya Manusia. Jakarta: Salemba Empat.
Notoadmojo, Soekidjo., 2007, Promosi Kesehatan dan Ilmu Perilaku, Jakarta: PT, Rineka Cipta.
OHSAS., 18001:2007, Occupational Health And Safety Management System – Requirements
Pemerintah Indonesia., 1960, Undang-Undang Pokok Kesehatan RI, No. 9, Bab I, Pasal II.
Pemerintah Pusat., 1970, Undang-Undang Tentang Keselamatan Kerja, No, 1.
Peraturan Menteri Tenaga Kerja., 2010, Tentang Organisasi dan Tata Kerja Kementerian Pekerjaan Umum, No, 08. Prt, M.
Putri, L. K., & Suletra, I. W. (2017). Analisis risiko K3 di proses produksi tiang pancang dengan metode JSA dan risk matrix: Studi kasus di PT X. In Seminar dan Konferensi Nasional IDEC, 8-9.
Putra, R. D., Sukandari, B., & Wihartono, W. (2019). Risk Management of Occupational Safety and Health in KRI Docking Project Using Hazard Identification, Risk Assessment and Risk Control (HIRARC) Method Case Study: PT. PAL Indonesia. Journal Asro-Sttal-International Journal, 10(2), 76-91.
Rijanto., Pedoman Pencegahan Kecelakaan di Industri, Mitra Wacana Media, Jakarta : 2011.
Ramli., 2010, Sistem Manajemen Keselamatan dan Kesehatan Kerja OHSAS 18001, Seri Manajemen k3 001. Dian Rakyat Indonesia.
Ramli., 2010, Pedoman Praktis Manajemen Risiko dalam Persepektif K3 OHS Risk Management, Seri manajemen k3 002. Jakarta : Dian Rakyat.
Ramli, Soehatman., 2010, Manajemen Kebakaran. Jakarta : Dian Rakyat.
Suma’mur, PK., 1981, Keselamatan Kerja dan Pencegahan Kecelakaan. Jakarta: PT. Toko Gunung Agung.
Simanjutak., 1994, Manajemen Keselamatan dan Kesehatan Kerja, Jakarta: HIPSMI.
Suma’mur., 2009, Higiene Perusahaan dan Kesehatan Kerja (HIPERKES). Jakarta: Sagung Seto.
Soemarno. 2011. Definisi Manajemen Proyek. From www.abdreas- lucas.blogspot.com.
Triwibowo., 2013, Kesehatan Lingkunngan dan K3. Yogyakarta: Nuha Medika.
