Identifikasi Bahaya dan Analisis Risiko Pada Pekerjaan Ketinggian Menggunakan Metode Job Safety Analysis (JSA) Pada Gedung Fasilitas Kesehatan di Kota Semarang

Abstract

Working at heights refers to performing tasks in elevated locations, which pose a risk of injury to workers in the event of a fall. To reduce the number of accidents caused by working at heights, one of the necessary steps is conducting hazard and risk assessments using the Job Safety Analysis (JSA) method. JSA is an analytical method used to identify hazards at the workplace and find ways to reduce the risks of accidents. The purpose of this study is to assess the completeness of safety equipment for working at heights, to explain hazard identification, to analyze risks in building structure work, to determine criteria and hazard assessments, and to understand risk control in building structure, plumbing, and electrical work according to the Job Safety Analysis (JSA) method in healthcare facility buildings in Semarang. The results of the study show that the risk level, calculated using the Risk Rating Number (RRN), for all potential hazards in structure, plumbing, and electrical work, reveals the following: for structure work, three hazards fall into the extreme category (43.84%), one hazard falls into the high category (16.44%), four hazards fall into the medium category (39.73%), and no hazards fall into the low category (0%); for plumbing work, three hazards fall into the extreme category (38.55%), one hazard falls into the high category (14.46%), five hazards fall into the medium category (46.99%), and no hazards fall into the low category (0%); and for electrical work, three hazards fall into the extreme category (44.74%), three hazards fall into the high category (31.58%), three hazards fall into the medium category (21.05%), and one hazard falls into the low category (2.63%).