Analisis Simulasi Penetrasi Material Proyektil WC-6Co dan Baja Standar Pindad terhadap Pelat Baja Armox 500T dalam Aplikasi Pertahanan Menggunakan ANSYS
DOI:
https://doi.org/10.58192/unitech.v4i1.2968Keywords:
Proyektil, WC-6Co, baja (Standar Pindad), Armox 500T, ANSYS Student, PertahananAbstract
Penelitian ini bertujuan untuk menganalisis kemampuan penetrasi dua jenis proyektil, yaitu WC-6Co dan baja standar Pindad, terhadap pelat baja Armox 500T, yang dikenal memiliki ketahanan tinggi dan digunakan dalam aplikasi pertahanan. Simulasi dilakukan menggunakan perangkat lunak ANSYS Student dengan pendekatan eksplisit dinamik untuk mengevaluasi total kecepatan dan deformasi selama tumbukan proyektil pada pelat. Proyektil WC-6Co menunjukkan kemampuan penetrasi yang signifikan, menembus pelat Armox 500T dengan kecepatan maksimum mencapai 1063,4 m/s, serta menghasilkan deformasi maksimum 3,1779 meter. Sebaliknya, proyektil baja standar Pindad hanya menghasilkan deformasi lokal tanpa penetrasi, dengan kecepatan maksimum 1347,7 m/s dan deformasi maksimum 4,0253 meter. Hasil ini menunjukkan bahwa proyektil berbasis WC-6Co lebih efektif dalam menembus pelat baja Armox 500T dibandingkan dengan proyektil baja Pindad, memberikan wawasan penting bagi pengembangan sistem pertahanan dan pilihan material pelindung.
References
A. Komrakova and J. D. Hogan, "Simulation of Bullet Fragmentation and Penetration in Granular Media," Materials, vol. 13, 2020.
A. Moslemi Petrudi, "Numerical simulation of ballistic projectile penetration due to high velocity impact on ceramic target," Engineering Fracture Mechanics, 2020.
A. Paman, G. Sukumar, B. Ramakrishna, and V. Madhu, "An optimization scheme for a multilayer armour module against 7.62 mm armour piercing projectile," International Journal of Protective Structures, vol. 11, 2020.
aritonang, sovian & murniati, riri & Global Akademia, Mia. (2024). MATERIAL PERTAHANAN.
Basyir, A., Bura, R. O., Lesmana, D., & Antika, L. D. (2022). Evaluation of steel and tungsten carbide–cobalt (WC-8Co) 5.56× 45 mm calibre projectile penetration into Silicon carbide (SiC): experiment and numerical simulation. Def Sci J, 72(2), 205-216.
C. Su and B. Chen, "Study on effective protective area of ceramic composite target," IOP Conference Series: Materials Science and Engineering, vol. 768, 2020.
D. A. Pratiwi, T. W. Riyadi, D. Setiadhi, and A. Hariyanto, "Ballistic Performance Anti-Projectile Of Alumina And Weldox 460 E with Finite Element Method," Creative Research in Engineering (CERIE), 2023.
D. Cheng, W. Pu, J. Qi, and L. Huang, "Study on Overload Characteristics of Projectile Penetrating Target at High Speed," 2022 4th International Conference on Artificial Intelligence and Advanced Manufacturing (AIAM), 2022.
G. S. Kushwah, B. V. S. N. Reddy, M. Kumar, and P. Kumar, "Numerical Simulation of Spinning Kinetic Energy Projectile Against Reinforced Concrete Target Using ANSYS AUTODYN," Lecture Notes in Mechanical Engineering, 2021.
J. Wang, J. Zhao, Y. Zhou, and S. Sun, "Boundary Effect and Dynamic Response Study for the Penetration of Rigid Projectiles into Thick, Finite-Radius, Metallic Targets," Shock and Vibration, 2020.
J. Zhang, H. Zhao, S. Zhou, and Q. Yu, "Numerical modeling and verification of reactive projectile impacting plate," Journal of Physics: Conference Series, vol. 2478, 2023.
Kharchenko, V., Kondryakov, E., Katok, O., & Kravchuk, R. (2022). Numerical simulation of deformation and fracture processes during static and dynamic perforation of thin plates from high-strength materials. Procedia Structural Integrity, 36, 137-144.
K. Senthil, M. Iqbal, and B. Madhu, "Prediction of superior target layer configuration of armour steel, mild steel and aluminium 7075-T651 alloy against 7.62 AP projectile," Structures, 2020.
L. Mao, A. Komrakova, and J. D. Hogan, "Dynamic failure of Armox 500T steel against high-speed long-rod impact," Progress in Canadian Mechanical Engineering, vol. 6, 2023.
O. Abdelsalam and A. Fayed, "Tungsten carbide core 12.7x99 mm AP projectiles ballistic behavior against high hardness steel armor," Journal of Physics: Conference Series, vol. 2299, 2022.
P. Żochowski, M. Bajkowski, R. Grygoruk, M. Magier, W. Burian, D. Pyka, M. Bocian, and K. Jamroziak, "Comparison of Numerical Simulation Techniques of Ballistic Ceramics under Projectile Impact Conditions," Materials, vol. 15, 2021.
S. Ngo, B. Beer, and R. Konečný, "Effect of Target Arrangement and Target Materials Properties on Penetration Depth," Advances in Military Technology, 2020.
Sovian aritonang & Global Akademia. (2023). DASAR-DASAR ILMU DAN TEKNIK MATERIAL PADA SEKTOR PERTAHANAN
Sovian aritonang & Global Akademia. (2023). MATERIALS SCIENCE & ENGINEERING Implementation of Cases within the Defense Sector
Suhirwan, Suhirwan & Prakoso, Lukman & Toruan, Tsl & Aritonang, sovian & Pramono, Budi & Prihantoro, Kasih. (2021). NATIONAL DEFENSE STRATEGY.
X. P. Wu, L. Wang, and Q. Chen, "Research on Influence of rotation velocity on projectile penetration ability," Journal of Physics: Conference Series, vol. 2478, 2023.
Y. Gocmen, C. Erdogan, and T. Yalçinkaya, "A numerical study on the ballistic performance of projectiles formed by shaped charge," Journal of Applied Mechanics, 2023.
