Rancang Bangun Prototipe Monitoring Suhu, Kelembapan, dan Kebisingan Berbasis Internet of Things pada Laboratorium Kalibrasi

Syukur Yakub; Ekha Rifki Fauzi

doi:10.58192/populer.v5i3.5572

Authors

Syukur Yakub Universitas PGRI Yogyakarta
Ekha Rifki Fauzi Universitas PGRI Yogyakarta

DOI:

https://doi.org/10.58192/populer.v5i3.5572

Keywords:

Calibration Laboratory, DHT22, ESP32, Internet of Things, KY-037

Abstract

Environmental conditions in calibration laboratories need to be monitored to support consistent measurement activities. This study aimed to develop an Internet of Things (IoT)-based prototype for monitoring temperature, humidity, and noise. The system integrated an ESP32 microcontroller, a DHT22 temperature and humidity sensor, a KY-037 noise sensor, a 16×2 I2C LCD, a buzzer, and the Blynk platform. An experimental engineering method was employed through system design, prototype development, and performance testing. Sensor readings were compared with reference instruments at three measurement locations, with ten measurements conducted for each parameter at each location. The results showed an average relative error of 0.53% for temperature, with a mean difference of 0.14 °C; 1.86% for humidity, with a mean difference of 1.08 %RH; and 1.69% for noise estimation compared with a sound level meter. The buzzer operated according to the programmed threshold, activating when the estimated noise level exceeded 40 dB(A). IoT testing confirmed that the three monitored parameters could be displayed on the LCD and transmitted to Blynk for access via a laptop or smartphone. The prototype can therefore serve as a supporting device for environmental monitoring and early warning in calibration laboratories under the tested conditions.

References

Al-Farzaq, A. A., Harmadi, H., & Elvaswer, E. (2022). Wireless Data Logger Instrument for Indoor Acoustic Quality Measurement Based on Noise Background, Sound Distribution and Reverberation Time. Jurnal Ilmu Fisika| Universitas Andalas, 14(1), 37–44.

Anastasopoulos, G. (2017). The new iso/iec 17025: 2017. CAL LAB the International Journal of Metrology, 30–35.

Awaluddin, M., Syahrir, S., & Zarkasi, A. (2022). Rancang Bangun Prototipe Monitoring

Suhu Dan Kelembaban Udara Berbasis Internet of Things (IOT) Pada Laboratorium Kalibrasi Balai Pengujian Dan Sertifikasi Mutu Barang Samarinda. Progressive Physics Journal, 3(1), 132. https://doi.org/10.30872/ppj.v3i1.910

Harianto, D., Bintang, H. S., Ardiyanto, A., & Widyawan, V. L. D. (2024). Development and Evaluation of an ESP32-based Temperature and Humidity Control Unit for Textile Storage. International Journal of Engineering Continuity, 4(1), 1–19. https://doi.org/10.58291/ijec.v4i1.309

Ice Irawati, S. K. M. (2026). BUKU AJAR KEBISINGAN DAN GETARAN KERJA. Penerbit Yapista.

Mahardiananta, I. M. A., Suandari, P. V. L., & Pratama, I. G. A. N. D. P. (2023). Design Thermohygrometer Based on Internet of Things in Clinical Laboratory. Indonesian Journal of Electrical Engineering and Computer Science, 31(3), 1311. https://doi.org/10.11591/ijeecs.v31.i3.pp1311-1318

Purnomo, B., & Sunardi, S. (2023). Room Temperature and Humidity Control System Using Arduino and Blynk. 1(2), 118–123. https://doi.org/10.59247/csol.v1i2.46

Rifqah, R. A. N., Suciyati, S. W., Surtono, A., & Pauzi, G. A. (2023). Design of a classroom noise monitoring tool using a KY-037 sound sensor based on Wemos D1R1. Journal of Energy, Material, and Instrumentation Technology, 4(4), 125–135.

Robittah, A., Habibi, A. F., Al Farizi, H., Hariyono, M. A., & Rahman, A. (2026). Design And Implementation Of An Embedded Temperature Control System For Laboratory-Scale Pyrolysis Applications. ⁠ International Journal of Sustainable Social Culture, Science Technology, Management, and Law Humanities, 3(1), 49–58.

Rocha Ribeiro, R., Bauer, E., & Lameiras, R. (2021). Higroterm: An open-source and low-cost temperature and humidity monitoring system for laboratory applications. Inventions, 6(4), 84.

Sari, H. M., Robittah, A., & Rizkiansyah, R. (2025). Design and Development of an Indoor Environmental Comfort Measurement Device for Ergonomic and Health Aspects. PORYGON, 1(1), 10–18.

Satryawan, M. A., & Susanti, E. (2023). Perancangan Alat Pendeteksi Kualitas Udara dengan IoT (Internet of Things) Menggunakan Wemos ESP32 D1 R32. Sigma Teknika, 6(2), 410–419.

Suprapto, W., Irawan, Y. S., & Robittah, A. (2025). Logam Paduan dan Aplikasinya. Universitas Brawijaya Press.

Zaini, M., Salman, Y., Hariyono, M. A., Robittah, A., & Santoso, B. I. (2026). Penerapan Teknologi Tepat Guna Alat Pengering pada Produksi Bedak Dingin Bunga Tanjung. ABDI UNISAP: Jurnal Pengabdian Kepada Masyarakat, 4(1), 219–226.

Zaini, M., Salman, Y., Hariyono, M. A., Tahdi, M., Robittah, A., Isna, I., Hazizah, H., Widyawati, T. A., & Priyadi, B. (2025). SOSIALISASI SANITASI DAN HIGIENITAS DI LINGKUNGAN KERJA UD. SU’AIDI SALMAH. Jurnal Abdi Insani, 12(10), 5120–5129.